Steering Wheel Cover for Toyota Land Cruiser 200 Series Land Cruiser 70 Series Tundra Sequoia HiAce 2007-2019

Came straight from China and the instructions are comical but definitely seems like a quality product. Install took some time but turned out great. Made my worn through steering wheel look factory new.

Exacly what my truck needed

Good quality and fitment. I installed it over a lesser quality synthetic leather steering wheel cover and it still turned out great.

Great product, Gave my truck that new look and leather smell. Not to difficult to install. Watched a couple of videos of installation. Took about 2 hrs from start to finish. I’ve had it on for about 3 weeks now, only wish I would’ve done it sooner.

Perfect fit on my 07 tundra. Took 2 hours. Follow directions and watch video. Great quality.

Worked great! Only problem was the stich broke halfway through the longest run and was a pain to fix. Other than that it was nice

I had purchased a Wheelskins for my old Tundra that I really liked. After I replaced my older Tundra with a newer one I thought I would see if I could get a steering wheel cover that had a more factory look. After finding this one I ordered it hoping for the best. It did take about 3 weeks or so to get it in, but I was not in a hurry. I waited until I had a couple of free hours and watched the youtube video and got to work. The key in installing this is to not be in a hurry to get it done. About halfway through I realized this was going to look amazing. Even with a couple of mistakes with the stitching it still looks like a factory install. Great product, I definitely would recommend this.

Like everyone else has said, it takes some patience to install. Do not tape under the smooth part, the tape will show through

Not a bad product. Take your time and plan to spend about 3 hour sewing. I did rip a bit in one section but you can’t really tell.

I installed this on 9/6/19. It’s the second one I’ve done but this one I hope lasts longer. The last one started peeling at the 6 month mark. This company says theirs is real leather not a fake. It seems better and I’m very happy with how it installed. So for now I’ll recommend it. But I’ll update after a year.

What a high class steering wheel cover! I really don't know how the other manufacturers are in business? I have one of those other skin's and it doesn't even compare to the quality, comfort and fit of this Loncky! Very impressive all around, I intended to take a before picture but I was too excited to get this installed. Anyway I had some difficulty in a couple of spots where the fit around steering wheel arms wasn't quite as tight as it should have been, but overall I am definitely satisfied.

Take your time watch the videos and do a good job centering and it will turn out great. use the double sided stick tape on the spoke areas of the steering wheel and not the cover and it will fit nice and tight. Took me about 3 hours and to put on.

Installed in my 2013 tundra. I pulled the wheel and installed it in the house. Much easier in my opinion. Happy with the quality for the price!

This product is awesome and well made. It took me some time to finish but well worth the out come!

Extremely impressed. Very high quality leather, fitment is spot on, plenty of extra thread included, and it just turned out looking like an OEM component.

Got to my door within a week or two. Very high quality. Precision fit. Could use a better instructional video for sewing it cause I had never seen before but It worked out. Will probably order another one at some point to switch it up perfect the stitching.

Takes time and patience to stitch...but well worth the effort. This is a high-quality leather cover, and I'm very happy with the result on my Land Cruiser. Several Cruiser pals have seen it and are ordering as well. Mine was not only nicely packed, but came with a personally written note several sentences long. A nice...and RARE...touch in the internet age. Great stuff...Great upgrade.

Excellent wheel cover!!! Took a good month to get to my door, so don't be in a hurry if you order one. Like another reviewer mentioned, it took a good 4 hours to put it on. I wetted the cover a little with a spray bottle and distilled water and put it on the wheel out in the sun for a day before I started stitchng it on. This helped out form to the wheel a bit better. Also, I used a spring clamp to hold the stitching tight as I went along, which was a HUGH help. One other thing, you may not want to put the provided tape on the front side of the steering wheel under the smooth/non-dimpled area of the cover. It prints thru the cover ever so slightly when you're all done and it has had a few days to settle. Not really noticable but if you're OCD it might bug you. End results are stellar and well worth the wait to get it and the effort to install. I would do it all again without hesitation.

I just installed this cover this morning on my 2007 Tundra and it took me about 4 hours. I don't do things like this often; I work in spreadsheets and numbers most days. Still, it actually turned out great. The final product looks and feels amazing; about everything I ever wanted in a new steering wheel cover. They provide a link to a Youtube instructional video that makes installation look incredibly easy. I watched it enough times the music is still stuck in my head. Just to be clear about what you're buying: this is a very nice piece of leather that you must sew onto your steering wheel. They provide all the tools you'll need, along with plenty of extra double-sided tape and thread. Here's a few tips I have for anyone trying this for the first time like I was: 1) give yourself plenty of time to do this properly. I got started in the cool hours of the morning and was surprised it took me until lunch. 2) apply the double-sided tape to the cover while it is off the wheel. in other words, don't apply tape while attempting to position the cover in place. The video shows it this way, but their instructional card shows it done while the cover is not on the wheel yet - I prefer this way. 3) be sure you have the cover placed on the wheel correctly. it is easy to put it on backward (at least for the Tundra model) 4) make sure to give yourself plenty of thread when sewing each section. The video says three times the length but this is not enough. Thankfully, I kept erroring on the side of too much thread. They give you plenty of thread; don't be stingy. It will be cumbersome but its much better than not having enough to finish a section. 5) don't be afraid to make each stitch rather tight, but be careful to thread the needle well and pull slowly and firmly. I busted a couple stitches unfortunately but the finished product still looks great. Overall, this is a great product so far and I'm very happy I took a chance with installing this rather than buying a cheap cover from an auto shop or a department store locally.

Love it!!!! I’m constantly rubbing my new steering wheel. Feels better than the original. The premium leather is exactly that, premium. Takes a long time to install so be patient. It’s worth it.

Looks and feels great! . I did it by myself.
I only recommend before start sewing is to center the piece exactly in the right position to avoid at the end of the job any incompatibility.

Great cover. Looks factory. Takes a bit of time but simple install.